Instructions / Assembly
Part C.
Connecting the Fire Table to the Gas Cylinder.
This next step guides you to connect the Fire Table
Regulator to the Gas Cylinder.
Step1: Connect the Black Coupling Nut on
the Regulator to the Cylinder Valve.
Step2: Turn the Black Coupling Nut, fully
CLOCKWISE until fully locked into position.
Step 3: In order to Check for Leaks: Brush
soap and water mixture on all connections.
Note: Turn the gas supply on.
If any extra large bubbles form on any
connection there may be a leak.
If you smell gas or a leak is discovered,
IMMEDIATELY turn the gas valve off,
disconnect Propane Gas tank.
Do not use the appliance until the leak is
repaired.
9










