4. Color LCD Page 5 TABLE OF CONTENTS 1. Safety Information ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ Page 3 2. Remote-Pager : 2W9000Pro, 2W9000Pro-2nd w/LCD ᴍᴍᴍᴍᴍᴍᴍᴍ Page 4 ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ Page 4 3. Color LCD 4. Description ofᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ Rmote Appearance Page 5 5. LCD Icons ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ Page 6 6. Remote-Pager Button Functions ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ Page 7 7. More Button Functions ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ Page 8 8. Remote-Pager Learn Routine ᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍᴍ Page 9 9.
Description of Remote Appearance Important! Under normal circumstances, Reservation Mode is cancelled when a door or hatchback opens. Please verify if the opening of any door or hatchback cancels Reservation Mode. If any of the doors or hatchback is not monitored by MAGICAR because of improper installation or a faulty dome light switch, do not use the MAGICAR and take your vehicle to the dealer immediately for repair.
LCD Icons Icon Icon Explanation Displays if your vehicle has auto-started properly or ignition on. Indicates if Timer Mode is on or off. Displays if your Hood is open. Indicates if Turbo Start Mode is on or off. ( 2W9000Pro ) Displays if your trunk is open. Indicates if Passive Arming Mode is on or off. 2nd Vehicle - on/off.
Remote-Pager Learn Routine More Button Functions (1) Time Setting Button PressedFor STEP 1 (II+III) - 2 sec STEP 2 (I) 1/2 sec Time setting is on. The numbers flash. Beep Sound. STEP 3 (I) (II) 1/2 sec Change time. 1/2 sec Change minutes.
Dual Stage Shock Sensor Press Buttons HiKiiiI@ for 2 seconds to activate or deactivate the dual stage shock sensor. The dual stage shock sensor will activate in 30 seconds after the MAGICAR alarm mode is armed. When the dual shock sensor is engaged, the remote-pager security alerts will be triggered by the following: Light impact to your vehicle will activate the first stage shock sensor and the car siren will chirp 4 times in addition to the parking lights flashing 4 times.
Activating Reservation Mode (Manual Transmission only) Step1 : After arriving at your destination, and BEFORE TURNING Step2 Step3 Step4 Step5 : : : : YOUR ENGINE OFF, place the transmission in the Neutral position. Remove your foot from the foot brake. Activate the parking brake. Remove the key from the ignition. The engine will remain running. Exit the vehicle and close the door within two minutes after activating the parking brake.
Valet Mode RPS (Remote Paging System) The only feature operating in valet mode is the keyless entry function. Valet Mode is very useful when loaning your vehicle or having it serviced. In order to enter Valet mode, press Buttons HiKiiiI simultaneously for a 1/2 second. In order to manually enter Valet Mode, insert your car key into the ignition and turn the ignition on and off (between ACC and ON) five times within 10 seconds.
Passive locking means the door will lock when the system passively arms. In the default factory setting, the system is armed and locked actively, which means the system will only arm/lock when the remote-pager is utilized. Note: 1. If you select both Auto Arming and Passive Arming, Auto Arming takes priority over Passive Arming. 2. If you select Passive Arming with Active Lock in the programming option, you are also selecting Auto Arming without Auto Lock. Consult your installer.
