User's Manual

Safety Information
Please take these safety precautions into consideration, under the following conditions :
Page 4
1. Servicing the vehicle
When servicing your automobile (i.e. changing the oil, washing your car), the
Magicar system should be in Valet Mode.
2. Loaning your vehicle to others
Whenever you loan your vehicle to an individual who is not familiar with Magicar,
please put the vehicle in Valet mode. This will prevent the vehicle barrower from
accidentally activating the Magicar auto-security system.
Page 5
Remote Learning Routine
The Magicar will allow up to three remotes to be programmed to one vehicle.
Please perform the following procedure to add or reprogram additional remotes.
Step1: Activate Valet/ Programming mode by manually
turning the ignition on and off three times (between Acc and
On) with the key within a 7 second period.
The parking lights will flash once with successful completion of
this step.
Remote Button Functions
1
2
3
4
5
6
Lock0.5 sec
0.5 sec
0.5 sec
Unlock
Button Press Function
2 sec
Panic, Press Lock to shut off Siren
Siren Chirps for Lock /Unlock - on/off
0.5 sec
Passive Arming - on/off
2 sec
Trunk Release
Note : " " Means pressing the button for 2 seconds.
" ( ) " Means simultaneously pressing the buttons.
" ( ) " Means simultaneously pressing the buttons for 2 seconds.
To lock the vehicle, pressing the button for a 0.5 second.
To unlock the vehicle, press the button for a 0.5 second. If the pressing of the
lock/unlock buttons does not lock/unlock the doors, you will need to release the
button and try again, as the remote stops transmitting as soon as the LED stops
flashing. If the button is pressed for 2 seconds, it will panic the system.
Keyless Entry
Step2 : Within a 7 second period after cycling the ignition for the 3
rd
time,
Press the button for a 0.5 second. The parking lights will flash
once to confirm that the transmitter has been programmed.
You can continue programming additional remotes. The parking lights
will flash two times when the programming mode has expired.
To arm the vehicle, press the button .
To disarm the vehicle, press the button.
If pressing the arm/disarm buttons does not arm/disarm the vehicle, you will need to
release the button and try again, as the remote stops transmitting as soon as the
LED stops flashing.
Press the buttons for a 0.5 second to mute the vehicle siren when
arming or disarming your vehicle. Keep in mind that your siren will still be activated
for all other modes(i.e.panic or alarm trigger) regardless of whether or not your siren
is in mute mode. The siren will be mute only when arming or disarming your vehicle.
Alarm Mode