Owner`s manual

80www.seuservice.com
18 - 2 FILTER BOARD
Set all DIP SW on the FILTER BOARD to OFF.
FIG. 18. 2 b
FIG. 18. 2 a
RGB1 (NOT USED)
FILTER BOARD
Connect RGB CABLE to RGB2.
SHIELD CASE
DIP SW see FIG.18.2 b
STOP
IMPORTANT!
Ensure that the DIP SW setting is performed as designated. Failure to observe
this may cause functioning not suitable for the actual operation, or
malfunctioning.
DIP SW SETTING