www.seuservice.com 1ST PRINTING JULY ‘03 REV. 2 A Game of Skill Owner’s Manual SEGA AMUSEMENTS USA, INC. MANUAL NO.
VISIT OUR WEBSITE!
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately.
Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated.
TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER’S MANUAL 1. HANDLING PRECAUTIONS .......................................................................................... 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ................................... 3. OPERATION ..................................................................................................................... 4. ASSEMBLING AND INSTALLATION ......................
Installation Space Height Width Length Weight Power, maximum current MONITOR SPECIFICATIONS : : : : : : 24.75 inches width X 42.25 inches deep 62.5 inches 24.75 inches 34.
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN WARNING! Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock.
Notes:
1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. WARNING! Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit.
STOP IMPORTANT! For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful in this regard. Static electricity from your body may damage some electronics devices on the IC board. Before handling the IC board, touch a grounded metallic surface so that the static electricity can be discharged. Some parts are the ones designed and manufactured not specifically for this game machine.
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION WARNING! This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and or malfunctioning. Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc.
Operation Area WARNING! STOP For the operation of this machine, secure a minimum area of 24.75 in. (W) × 42.25 in. (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening.
3. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. In order to avoid accidents, check the following before starting the operation: WARNING! To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read.
CAUTION! WARNING! Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down. Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage. Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step.
4. ASSEMBLING AND INSTALLATION WARNING! CAUTION! Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance. When assembling, be sure to use more then one person.
24.75 in. Vent approx. 8 in. 42.25 in. FIG. 6. 2 e Provide ventilation space for the ventilation opening. Allow more than 28 in. of space for customer traffic. www.seuservice.
POWER SUPPLY, AND EARTH CONNECTION WARNING! Be sure to independently use the power supply socket outlet equipped with an Earth Leakage Breaker. Using a power supply without an Earth Leakage Breaker can cause a fire when electric leakage occurs. Ensure that the "accurately grounded indoor earth terminal" and the earth wire cable are available (except in the case where a power cord plug with earth is used).
5. PRECAUTIONS WHEN MOVING THE MACHINE WARNING! CAUTION! When moving the machine, be sure to unplug the power plug. Moving the machine with the plug as is inserted can damage the power cord and cause fire and electric shock hazards. When moving the machine on the floor, pay careful attention so that adjusters do not tread power cords and earth wires. Damaging the power cords can cause electric shock and short circuit hazards.
6. NAME OF PARTS Marquee Speaker Play Area 7 Seg. Display Play Button Coin Inlet Prize Chute TABLE 1 Dimensions and Weights CABINET Width x Length x Height 24.75 in x 34.25 in x 62.5 in 11 Weight 210 LBS www.seuservice.
7. GAME DESCRIPTION The following explanations apply to cases where the product is functioning satisfactorily. Should there be anything different then the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satiffactory operation.
8. HOW TO PLAY Play starts with the player inserting a coin/ token into a slot on the front of the machine. Insert Coin/Token When the coin/token is realeased the Elephant moves his head and “Nose” in an attempt to aquire a “Prize” for the customer. Depending of settings on the game board the Elephant may attempt until a prize is dispenced or stop after a single attempt.
9. Gameboard Config Settings Dip Switches Dip Switches SW1 Switch 1 (Play until Prize is won) On Enable play until prize is won Off Disable play until prize is won Switch 2 & 3 (Credits per Play) Off Off 1 Credit for play amount Off On 2 Credits for play amount On Off 3 Credits for play amount On On 4 Credits for play amount * If Switch 1 is “On” then Switches 2&3 (Credits per play) are ignored. Switch 4 & 5 (Coin amount to play) Off Off $0.25 to play Off On $0.50 to play On Off $0.75 to play On On $1.
Optical sensor check sequence: • On Power up or game resetting for next play the optical sensor status is analyzed. • If Optical status is not saved for each optical sensor the game will initiate the “Optical Sensor check sequence” which moves each motor in sequence to test sensor transitions. • Order in which sensors are checked: 1) Head will move down and up to test head sensors 2) Body will move to Elephants Left sensor and test transition.
12. Test Mode While the game is playing: - Press test button once plays a sound but doesn’t affect game play. - Press and hold test button for 2 seconds stops game-play, clears credits and resets game.
13. DESIGN RELATED PARTS 999-1726 Plex Marquee JT 999-1729 Decal Header Left 999-1730 Decal Header Right 999-1738 Glass Front Door 999-1739 Plex Right Side 999-1740 Plex Left Side 999-1736 Eyeball SET 999-1727 Plex Control Panel 999-1731 Decal Cabinet JT Left 999-1732 Decal Cabinet JT Right 999-1728 Decal Game Front 17 www.seuservice.
14. PARTS (Header) 1 2 3 4 Item # 1 2 3 4 Part # 999-1733 Local Purchase 999-1751 999-1749 www.seuservice.
PARTS (Midheight of Game) 1 9 8 11 10 5 6 7 Item # 1 Part # 999-1734 Description Top Sash 5 6 7 8 9 10 11 999-1741 999-1742 999-1735 999-1743 999-1745 999-1744 999-1746 Main Door Hindge Main Door Frame Bottom Sash Cab Rear Door Key & Lock Rear Door Main Door Key & Lock X2 Prize Chute Top 19 www.seuservice.
PARTS (Lower Game) 4 1 5 7 6 Item # 1 2 3 4 5 6 7 Part # 999-1752 999-1753 999-1754 999-1755 999-1747 999-1748 999-1737 www.seuservice.
PARTS (Electronics) 1 2 5 3 4 4 Item # 1 2 3 4 5 Part # 998-0185 998-0186 998-0187 998-0189 998-0188 Description Transfomer Power Supply Line Filter Motor Boards Main Game Board 21 www.seuservice.
PARTS 1 2 3 7 4 8 6 9 Item # 1 2 3 4 5 6 7 8 9 10 10 Part # 999-1758 999-1756 999-1757 999-1750 999-1830 999-1831 999-1832 999-1833 999-1834 999-1835 www.seuservice.
PARTS 16 7 8 17 9 6 15 14 10 11 2 3 4 5 13 1 Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Part # 999-1814 999-1815 999-1816 999-1817 999-1818 999-1819 999-1820 999-1821 999-1822 999-1823 999-1824 999-1825 999-1826 999-1827 999-1828 999-1761 999-1829 12 Description Notes Trunk Tip Mount Trunk Channel Trunk Band Metal Trunk Band Plastic Trunk Band Plastic Ribbed Trunk Frame Trunk Band Bracket Trunk Band Mount/Slide Trunk Band Arm Encoder Wheel 1/2 Trunk Trunk/Head Base Bracket Shoulder Screw Al
PARTS 7 8 2 1 6 2 3 9 5 4 Item # 1 2 3 4 5 6 7 8 9 Part # Description 999-1841 999-1827 999-1847 999-1842 999-1843 999-1759 999-1844 999-1845 999-1846 Head Cam Opto Coupler 2 on bracket Opto Coupler Bracket Head Head Motor Bracket Elephant Main Frame Head Motor Up/Down Motion Elephant Main Post Interrupter Opto Bracket Opto Coupler Bracket Body 3 of them www.seuservice.
PARTS 1 2 3 4 7 8 5 6 9 10 11 17 16 Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Part # 999-1848 999-1855 999-1854 999-1836 999-1762 999-1837 999-1838 999-1839 999-1840 999-1851 999-1849 999-1762 999-1850 999-1856 999-1852 999-1853 999-1844 15 Description Bearing Bracket Bearing Bearing Holder Bucket Shaft and Plate Bucket Motor Bucket Support Brace Shaft Coupler Bucket Motor Bracket Brace Mount Elephant Center Shaft Elephant Motor Bracket Elephant Motor Elephant Motor Coupler Heavy Bearing Ele
15. WIRE COLOR CODE TABLE THE WIRE COLOR CODE is as follow: A B C D E PINK SKY BLUE BROWN PURPLE LIGHT GREEN Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric characters. 0 1 2 3 4 5 7 8 9 NO TRACE RED BLUE YELLOW GREEN WHITE ORANGE BLACK GRAY If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by the left-hand side numeral (see the above).
16. INPUT PORT ASSIGNMENTS P9 - 34 pos.
P6(Multiplexed Lamp Source) - 16 pos. KK-100 connector Color Code Pin Bit Access Description 3C 1 BIT 1 Button lamp Source 31 2 BIT 2 Bin 1 Lamp Source 34 3 BIT 3 Bin 2 Lamp Source 32 4 BIT 4 Eye 1 Lamp Source 38 5 BIT 5 Eye 2 Lamp Source 6 BIT 6 Button Lamp Source Backup 7 BIT 7 Bin 1 Lamp Source Backup 8 BIT 8 Bin 2 Lamp Source Backup 9 BIT 9 Eye 1 Lamp Source Backup 10 BIT 10 Eye 2 Lamp Source Backup P10(Loudspeakers) - 5 pos.
Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
SEGA AMUSEMENTS USA, INC.
