Technical information

Sega Saturn Software Development Standards, SOA version 2.0 7
3. Company Logo Displays
3.1 Sega Logo Screen Display Requirements
• At Power On:
Required The application must display the “PRODUCED BY or
Compliance Item UNDER LICENSE FROM Sega ENTERPRISES, LTD.” boot
ROM-based Sega trademark logo screen immediately after power
on.
The logo data provided by Sega must be displayed without
modification.
• In the Title Loop Sequence (Sega Brand Titles ONLY):
Required The Sega logo must be displayed according to the format
Compliance Item described in section 3. 3 Screen Display.
Important! However, this does not apply to situations where a licensing
agreement explicitly overrides this logo display requirement. If
this applies, there must be compliance with the logo display
requirements stipulated in the licensing agreement.
• Sega Product Group/Team Logos (Sega Brand Titles
ONLY)
Required Sega product group/team logos (e.g. Sega Sports) must be
Compliance Item displayed immediately after the initial Sega logo display.
• Display of Contract Developer’s Logo (Optional)
Recommended If the display of the contract developer’s logo is required, that
Compliance Item logo may be displayed AFTER the display of the Sega logo in the
Title Loop sequence. The contract developer’s logo should be
displayed AFTER the Sega product group logo.
3.2 Skipping the Sega Logo Screen (Sega Brand
Titles ONLY)
Recommended The screen display sequence shown below should be avoided after
Compliance Item the power is turned on or the RESET switch on the Sega Saturn is
pressed:
1. Boot ROM-based Sega Saturn product logo screen.
2. Boot ROM-based “PRODUCED BY or UNDER LICENSE
FROM...” Sega logo screen.
3. Application-based Sega logo screen.