User`s manual

ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ, 7/18/94)
iii
POD
This unit is connected to the E7000 body with an interface cable. CPU is emulated by
inserting a PGA plug in front of the POD to the SH-2 CPU socket.
E7000
BODY
POD PGA plug
Main board
PGA (Pin Grid Array)
PGA comes from the grid-like array of male pins.
EVA Board (Evaluation Board)
This indicates SH-2 EVA board and the emulator for emulating main CPU (SH-2
CPU) of Target Box.
SH-2 Board
The SH-2 CPU, being the main control CPU, is mounted on this board. ICE (or the
EVA board) can be substituted for the SH-2 board.
The connector that links the SH-2 board to the main board uses the same connector
as is used for connecting the EVA board. The SH-2 board is normally loaded on the
slave side in the Programming Box and on the master side in the Graphics Box.