User`s manual

ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ, 7/18/94)
29
(2) SCSI-II
Used for connecting SCSI interface of the host machine (PC/AT, Mac, etc.). One
SCSI-II connector is provided. The symbol indicates the location of pin No. 1.
Both the Programming Box and Graphics Box support the SCSI - I/II. This
interface is terminated; therefore, make sure the setting is for at the terminated
end of the SCSI connection. For more information, please contact Sega
technical support center. (Also, please see support center in chapter 4.)
(3) AV-OUT Connector
Outputs the signal for displaying graphics.
Connect the attached AV cable and use.
AV-OUT Connector Pin Number
The pin number of the AV-OUT connector and signal name are shown in Figure
3.3.
Pin Number Signal Name
COMPOSITE SYNC
Figure 3.3 AV-OUT connector pin number and signal name
Environment Setting Switch
This switch sets the usage environment of the Target Box. The following functions
can be set.
Area code used
Image output format (NTSC/PAL)
Type of work station used (PC, SUN, HP)
SCSI ID
Expanded memory