User`s manual

ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ, 7/18/94)
13
2.3 Connecting the ICE
Removing the Target Box Main Cover
(1) Make sure the power supplies of all peripheral devices connected to the Target
Box are OFF.
(2) Remove the main cover of the Target Box. There are four screws to be
removed. See Figure 2.2.
(3) Loosen the two screws on the ICE/EVA board/SH-2 board plug port cover and
slide downward. See Figure 2.3 on the next page.
Figure 2.2 Removing the main cover on the Target Box