Specifications

16-70 Programmer’s Guide Sega
Psy-Q Development System
Running Programs
The Run command causes the CPU of the specified Unit to start running.
It will continue until it meets a breakpoint, a processor exception or is stopped by the
Stop or Run To Cursor commands.
During a debugging run the various Panes will show the progress of the run.
4 To start the program running:
1.
Select the Debug menu from the menu bar.
2.
Choose the Go option from the menu.
Note: Alternative ways to start the run are to click the Start button on the relevant
Unit toolbar or to press F9.
Stopping A Program Running
The Stop command halts the CPU of the specified Unit as soon as possible.
4 It is specified as follows:
1.
Select the Debug menu from the Menu bar.
2.
Choose the Stop option from the menu.
Note: Alternative ways to stop the run are to click the Stop button on the relevant
Unit toolbar or to press Esc.