Specifications

Saturn Psy-Q Installation 1-9
Psy-Q Development System
Remarks
• Normally, PSYBIOS.COM is loaded in the AUTOEXEC.BAT; it can safely be
loaded high to free conventional memory.
• If PSYBIOS is run again, with no options, the current image will be removed
from memory. This is useful if you wish to change the options without rebooting
the PC.
• If the DMA number is not specified, the BIOS will work without DMA; however,
it will be slower.
• The BIOS can drive the interface in 8 bit mode; however, this is the slowest mode
of operating the interface.
• The buffer size option (/b) sets the size of the buffer used when the target
machine accesses files on PC. A larger buffer will increase the speed of these
accesses; however, more PC memory will be consumed. The default is a 1 K
buffer.
Examples PSYBIOS /a308 /d7 /i15
Start the driver using the typical settings of:
Card address 308
DMA channel 7
Interrupt vector 15
Note: If you are using Windows ‘95, DO NOT install PSYBIOS from your
AUTOEXEC.BAT. Only install it from DOS.