Specifications

16-44 Programmer’s Guide Sega
Psy-Q Development System
Registers Pane
The Registers Pane shows the registers of the central processing Unit. These can be
overtyped if required.
If the CPU has a Status Register, you can overwrite the individual bits by typing 0 or
‘R’ to reset the bit or 1 or ‘S’ to set it.
The display also shows the disassembled instruction at the Program Counter (PC)
and the address of the instruction which will be executed next.
It also shows the current status and (if relevant) exception of the CPU on the bottom
line of the Pane.
Registers Pane Display
When you click the right hand mouse button over a Registers Pane or select the Pane
menu on the menu bar, you will see the Change Pane Type or Pane Operations
options. Note that these are the only menu options for this type of Pane.
The Active Pane can be made a Registers Pane via any of the following methods:
Clicking on the Registers Pane icon on the toolbar
Using the Pane Type option from the Pane menu
Using the Hot Key Ctrl+Shift+R