Specifications

1-8 Programmer’s Guide Sega
Psy-Q Development System
PSYBIOS.COM
Description PSYBIOS.COM is a TSR program, which acts as a driver for the Psy-Q interface
board, installed in the host PC.
Syntax PSYBIOS [switches]
where each switch is preceded by a forward slash ( / ) and separated by spaces.
Switches /a card address Set card address:
200 - 3f8
/b buffer size Specify file transfer buffer size:
2 to 32 (in kilobytes)
/c window n Report all CD access to debugger message
window n
/d channel Specify DMA channel:
5, 6, 7; 0 = off
/i intnum Specify IRQ number:
5, 7, 10, 11, 12, 15; 0 = off
/l filename Specify Fileserver log file; All fileserver
functions will be recorded in the specified
file.
/s id Overide PC Interface SCSI ID jumper
setting: 0 to 7
/8 Run in 8 bit slot mode