Specifications

16-24 Programmer’s Guide Sega
Psy-Q Development System
Specifying Binary File Properties
When you select a Binary File to include in your Project, you must complete the
following dialogue box:
Binary File Properties Dialogue Box
These properties allow you to control the downloading of files to the Target:
• Download when Project starts - If this is selected the Binary File will be
downloaded when the Project is opened or reopened.
• Downloaded to a specified address - The files will be downloaded to the address
specified. This should be in OX notation for hexadecimal numbers. The default
address will be zero.
• Specify the Unit where the File is to be loaded - Click on the down arrow to
display further Units.
If you do not set the first option for at least one Binary File, the File Server will not
download any Binary Files to the Target when the Project is opened. However, all
Binary Files in the Project will be available on the relevant Unit menu.
4 To change Binary File properties:
1.
Select the Project menu from the Menu bar.
2.
Choose Files from the menu.
3.
Select the Binary File to change and click .
4.
Select the Download when Project starts option if required and/or enter a
relevant address.
5.
Confirm or specify the Unit where the File is to be loaded.
6.
Click .