Specifications

16-22 Programmer’s Guide Sega
Psy-Q Development System
Specifying CPE File Properties
When you select a CPE File to include in your Project, a dialogue box requests that
you set the properties for this file.
These properties allow you to control the downloading of files to the Target. The
options are:
• Download when Project starts - This causes the CPE File to be downloaded
when the Project is opened or reopened.
• Run after CPE has been downloaded - This causes the Unit to start running the
code after downloading the file.
You may select either or both of these properties for any CPE File in the Project.
If you do not set the properties of at least one CPE File, the Debugger will not
download any files to the Target when the Project is opened.
4 To change CPE File properties:
1.
Select the Project menu from the Menu bar.
2.
Choose Files from the menu.
3.
Select the CPE File to change.
4.
Click .
5.
Use the check boxes to apply the properties.
6.
Click .