Specifications

16-20 Programmer’s Guide Sega
Psy-Q Development System
Selecting Files For Your Project
The Psy-Q Debugger uses files that are output from the build process. Three types of
file may be included in the Project; these are:
• CPE Executable Files
• Symbol Files
• Binary Files
Adding Files To The List Of Project Files
4 This is achieved as follows:
1.
Select the Project menu from the Menu bar.
2.
Choose Files from the menu; the Files dialog appears.
3.
Click to insert them into your file list.
4.
Select CPE, Binary or Symbol Files from the ‘Files of Type’ drop-down list.
5.
Locate the file and click .
6.
When you add a file to the file list a relevant dialog box requests you to set the file
properties. For CPE and Binary Files these will determine the downloading of
files to the Target. Additionally, for Binary and Symbol Files, they determine the
Unit to which they will be loaded. See the ‘Understanding File Properties’
sections below.
Note: It is not necessary to specify the Unit to which a CPE File should be loaded
as this information is held within the file itself.
7.
Repeat the operation until all the files you require appear in the list. To remove a
file from the list, highlight it and click .
8.
Click when you have added all the files you require.
The CPE and Binary Files will be downloaded in the order shown in the file list.