Specifications

Saturn The Windows ‘95 Debugger 16-11
Psy-Q Development System
Testing The Installation
Once the Debugger has been installed, you should now run PsyServe.exe in order to
test that the configuration is working correctly.
A similar message to the following should be displayed:
Psy-Q File and Message Server, Copyright 1995, SN Systems Ltd,
Version: 1.00 (December 1995)
Target: Sony Playstation Plug-In
Resources: Port=0x390, Interrupt=12
Loading SCSI Drivers...
Connected to SONY_PSX5.15
Ready to Serve
If no message appears at all, your Port and IRQ settings may be incorrect or there
may be a resource conflict with some other device.
4 However, you can change the Port/IRQ settings by re-running the Set-up program
as follows:
1.
Click on the Open File dialogue box.
2.
Select the appropriate Card from the Cards menu.
You will then be presented with the same dialogue box as was displayed during
installation.
See FAQ.DOC if you continue to have problems.