Specifications

Saturn The Windows ‘95 Debugger 16-9
Psy-Q Development System
Configuring Your Dex Boards
If you are installing a Full Release for the Sony PlayStation (DEX only), you must
specify the settings for these DEX Boards.
4 Enter appropriate values to the dialogue box displayed during the Set-up program.
DEX Board Settings Dialogue Box
1.
Enter a 3 or 4-digit hexadecimal number to the Port Address and Parallel boxes
and specify an IRQ value by clicking on the down arrow and selecting as
appropriate.
2.
Click .
3.
The installation is now complete.
IMPORTANT: Port Address and IRQ values must be correct for the Debugger to
work. If they are incorrect or another device is configured to use
similar settings, the programs will not work.
Note: The Parallel setting should be set to the I/O address of the port to which your
dongle is connected. Most PCs use 378 for 1pt1:. If your dongle is on a
different parallel port or your PC uses a non-standard port address, change this
value. See FAQ.DOC for more information.