Specifications

Saturn Psy-Q Installation 1-5
Psy-Q Development System
IRQ The PC card offers the following IRQ levels:
15, 12, 11, 10, 7, 5.
Select the required level by switching the adjacent dip switch.
You must only select one IRQ level.
The default setting is 15.
SCSI Termination Power
The SCSI Termination Power switch determines whether SCSI termination is
supplied on the card.
The default setting is On. This must not be changed.
IO Address The card offers a very large range of IO addresses from 200
16
to 3f8
16
in increments
of 8. The address is changed by altering the 6 dip switches labelled A3 to A8.
A8 is the most significant bit, and A3 is the least.
An address line is selected by switching it to Off.
The default setting is 308.