Specifications

1-2 Programmer’s Guide Sega
Psy-Q Development System
Installation Check List
• Check the configuration of the Psy-Q PC board and install in the host PC - see
later in this chapter for full installation details.
•
Check configuration of the Psy-Q Target Adapter and install in the target console
or machine - see later in this chapter for full installation details.
•
Connect the supplied cable from the PC to the target machine.
•
Load the PC board driver by typing, typically:
PSYBIOS /a308 /d7 /i15
See later in this chapter for full details of PSYBIOS.COM.
• Copy the runtime Psy-Q executable files to a directory on your PC - see the Issue
List, in the Introduction, for the programs supplied with this version of Psy-Q.
Also edit the PATH variable in autoexec.bat.
•
Switch on the target console.
•
Run the program RUN.EXE, without parameters, to verify the link to the target
adapter - see chapter 2 for details of the RUN downloader program.
•
If RUN correctly identifies the target, the Psy-Q system is now ready to be used,
to assemble, download and debug programs.