Specifications

Saturn The DBUGSAT Debugger 11-13
Psy-Q Development System
Splitting An Existing Window
To add another window to the display:
1. Position the cursor in the required window
2. Press F3
3. Press a cursor key to specify the location of the new window
Note that the new window is the same type as the source window.
Joining Two Windows
To remove a Debugger window:
1. Position the cursor in the required window
2. Press F4
3. Use the up or down cursor key to select the window edge to be removed
4. Press ENTER to confirm
Moving The Cursor Within A Window
You can position the cursor by clicking at the new location with the left mouse
button. The cursor control keys also allow the re-positioning of the cursor in the
selected window, as follows:
• Register Window - Use the four arrow keys to move between register values;
the HOME key positions the cursor in the top left register field.
• Watch and Register Windows - Use the four arrow keys to move between
adjacent lines and characters; the HOME key positions the cursor in the top left
character position.
• Disassembly and Text Window - Use the up and down arrows to move the
highlight bar; the HOME key moves the line under the cursor to the top of the
window.
• Hex Window - Use the four arrow keys to move between adjacent lines and
bytes/words; the HOME key moves the byte/word under the cursor to the top
left of the window.