Specifications

11-12 Programmer’s Guide Sega
Psy-Q Development System
Using Debugger Windows
The following key strokes and mouse actions allow the programmer to exercise
control over the Debugger display - note that a complete list of all key options is
given later in the chapter.
Moving Between Windows
Use one of the following methods to move between Debugger windows:
• Press F1, followed by an up or down cursor key to point to the required window
• Press Shift, plus up or down cursor key
• Point and click at the required window
Selecting The Window Type
Use one of the following methods to change the type of the current window:
• Use the mouse to select the SET TYPE option from the WINDOW menu
• Press Shift and F1
In each case a selection window is presented. To choose the new type - use the
mouse, type the initial letter or press the TAB key then ENTER.
Re-Sizing Windows
To change the size of a Debugger window:
1. Position the cursor in the required window
2. Press F2
3. Use the up or down cursor key to move the selected window edge to the desired
size
4. Press ENTER to confirm
Press Ctrl-Z to re-present the original display.