Technical information

SEGA Confidential
57
SATURN Virtual CD System User's Manual
Cannot find the beginning of REL info.
Unable to find the keyword within a specified RTI file that marks the start
of the relational data table.
Cannot allocate memory for ISO9660 file info.
Unable to allocate memory for storing ISO9660 file information.
Cannot allocate memory for DOS file info.
Unable to allocate memory for storing DOS file information.
Illegal relation table
Error in the relational data table.
Cannot open log file = ****
Unable to open the specified log file.
Cannot find DOS file in track **
Unable to find DOS file that matches the specified addresses in track**.
No File at this LSA **
Unable to find DOS file that matches the specified absolute time.
File <****> cannot be opened
The DOS file **** could not be opened.
Illegal offset
An address was specified that exceeds the size of the disc image file during
real-time emulation.
Not read
Failed to read data from the DOS file.
Cannot read data from disk image file
Unable to properly read data from the disk image file.
TOC is not loaded
An attempt was made to display the TOC data without it being loaded.
REL table is not loaded
An attempt was made to display the relational data table without it being
loaded.
VCDPRE.EXE
Command: VCDPRE
Command name: Creates a disc configuration data file
Function: Creates disc configuration data file required for direct DOS file access mode
CD emulation.
Format: VCDPRE startupfile [/i /d /f /c /l]
Description: A script file and a disc configuration data file are specified for the startup
file. The script is input from the specified script file and a disc configuration
data file that describes the configuration of the disc is then output. The
resulting disc configuration data is verified and error messages are output if
necessary. File names are assigned to the startup file by specifying the file
name after the keyword and a space.