Technical information

SEGA Confidential
22
Step 6- Launch the VCD emulator (VCDEMU.EXE).
Enter the command shown in the example. The VCD emulator will start and run
direct DOS access.
Example 6 C:\>VCDEMU∆TSTGAME[ENTER]
Result 6 The VCD emulator start up screen is displayed.
The VCD emulator is running.
Step 7- Start the operation from the target box.
Commands received from the target box, data transfer status, error messages, and so
on are displayed on the VCD emulator screen. See Chapter 4 for more details.
2.2 When Creating Disc Images
This section describes the process for “Real-Time Emulation”. If direct DOS file
access has previously been run, start with step 4 below. If not, perform steps 1 to 3
from the previous section.
Step 4- Start-up preprocessing program (VCDBUILD.EXE).
Inputting the command as shown in the example will start the preprocessing pro-
gram (
VCDBUILD.EXE) and create the file required for emulation.
Example 4 C:\>VCDBUILD∆TSTGAME.PRM
Result 4 Specified by the start up file, the disc configuration information
file
TSTGAME.RTI and the disc image file TSTGAME.DSK are
created.
To run the emulation, execute steps 5 to 7 from the previous section.