Technical information

SEGA Confidential
12
6.0 Switching Between Virtual CD and CD Drive
To make it possible to switch between the Virtual CD and the CD drive, a switch like
the one shown in Figure 1 has been placed between the CD Block and the CD drive.
When operating this switch, the CD trays of both the Virtual CD and the CD drive
must be in the open CD tray state. Use the Virtual CD Emulator menu item to set the
Virtual CD in the open CD tray state.
• Press the SPACE key.
• Make sure that “Menu” in the menu bar is highlighted. The menu appears when ENTER or the
DOWN cursor key is pressed.
• Set the Virtual CD to the "Open CD Tray" state by selecting the “Open CD Tray” and pressing
ENTER or SPACE.
If the switch is used without performing this operation, the track information stored
in the target machine will be inconsistent with that of the CD drive (VCD).