Owner`s manual

74
www.seuservice.com
TABLE 17.2
PROBLEM CAUSE COUNTERMEASURES
Unsatisfactory Accel and
Brake operation.
Start button input does
not work and they do not
ash.
Start button input works,
but they do not ash.
Incorrect volume setting.
Faulty Volume attachment or adjust
gear alignment.
Faulty connector connection.
Failure of the volume.
Faulty connector connections.
Unveried settings or operation.
The lamp is burnt out..
Adjust the volume value in the Test Mode.
Adjust the volume attachment and verify in
Test Mode.
Check the connections for the Accel and
Brake connectors and the connectors between
the Accel, Brake and Cabinet.
Replace the volume.
Check the connections for the connectors
between the I/O Board, the Cabinet and the
Control Panel and those inside the Control
Panel.
The Start button only ashes when Free Play
is set. Check the operation in Test Mode.
Replace the lamp.