Owner`s manual

www.seuservice.com

JVS TEST is used to verify the specs of the I/O BOARD connected to the Chihiro and to run

input tests.

I/O BOARD specs are displayed initially.

Screens may differ depending on the type of I/O BOARD connected to the unit.

D. JVS TEST

 Use the SERVICE Button to move the cursor to the desired test item.

 Move the cursor to INPUT TEST and press the TEST Button to enter the INPUT TEST screen

for the I/O BOARD currently displayed.

 When 2 or more I/O BOARDS are connected, move the cursor to NEXT NODE and press the

TEST Button to enter the test screen for the next I/O BOARD. The lower the NODE number, the

further away the node is from the Chihiro.

 Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.

JVS TEST

INPUT TEST

NEXT NODE

EXIT

NODE ****

NAME ****************

I/O BD JVS

Ver****

*********

CMD VER 1.1

JVS VER 2.0

COM VER 1.0

SWITCH 2 PLAYER(S) 13 BITS

COIN 2 SLOT

ANALOG 8 CH

ROTARY 0 CH

KEYCODE 0

SCREEN X:0 Y:0 CH:0

CARD 0 SLOT

HOPPER OUT 0 CH

DRIVER OUT 6 CH

ANALOG OUT 0 CH

CHARACTER CHARA:0 LINE:0

BACKUP 0

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON