Owner`s manual

www.seuservice.com

SECURING IN PLACE (ADJUSTER ADJUSTMENT)

Make sure that all of the adjusters are in contact with the oor. If they are not, the

cabinet can move and cause an accident.

This product has 8 casters and 8 Adjusters. (FIG. 6. 2 a) When the installation position is

determined, cause the adjusters to come into contact with the oor directly, make adjustments

in a manner so that the casters will be raised approximately 5 mm from the oor and make sure

that the machine position is level.

 Transport the product to the

installation position.

 Have all of the Adjusters make contact

with the oor. Adjust the Adjuster's

height by using a wrench so that the

machine position is kept level.

 After making adjustment, fasten the

Adjuster Nut upward and secure the

height of Adjuster.

FIG. 6. 2 b ADJUSTER

FIG. 6. 2 a BOTTOM VIEW

* Note:Image differs from actual unit.

WARNING!