User manual

GB-7

CASSETTE TAPE OPERATION

Cassette tape playback

1. Set the FUNCTION switch to select “TAPE” (cassette).

2. Press the STOP/EJECT button to open the cassette compartment.

3. Gently insert the cassette tape into the cassette

compartment as shown.

Note: The cassette compartment door is designed to

prevent the user from inserting the cassette upside

down. Improper cassette tape insertion may damage

the cassette deck inside the unit.

4. Close the cassette compartment.

5. To start playback, press the PLAY button.

6. To stop playback, press the STOP/EJECT button.

7. To pause playback, press the PAUSE button. To resume playback, press it

again.

8. To fast forward or fast rewind, press the F.FWD or REWIND button.

Press the STOP/EJECT button to stop at the desired position.

Cassette tape recording

1. When the unit is switched on, set the FUNCTION switch to select the mode

(CD, RADIO) and launch playback.

2. Insert the cassette tape (see previous paragraph).

3. Press the PAUSE button.

4. Press the RECORD and PLAY buttons together to place recording in

standby.

5. Press the PAUSE button again to start recording.

6. To stop recording, press the STOP/EJECT button.

7. To pause recording, press the PAUSE button. To resume recording, press it

again.

To erase a recorded cassette tape

1. Follow steps 1 to 5 in “Cassette tape playback” to play the cassette tape in

TAPE mode.

2. Press the RECORD and PLAY buttons together to start erasing.

3. To stop erasing, press the STOP/EJECT button.

Cleaning the tape heads

To maintain optimum sound quality, clean the pinch roller (a),

capstan (b), playback/record heads (c) and erasure head (d)

regularly (every 10 hours of use). Use a cotton swab lightly

moistened with cleaning fluid or denatured alcohol.