Operation Manual

UK-20
will show the number of tracks and the playing time of the CD/MP3/WMA tracks.
2. CANCEL PROGRAM
1. Press the STOP button once, or open the CD tray door and close it again then the
memory will be erased.
2. Set a new program, the existing one will be cleared.
Note: During the program mode.
1. Press the "REPEAT" button once, the "REPEAT" indicator will light on the display.
Then the main unit will repeat the current track.
2. Press the "REPEAT" button twice, the "REPEAT ALL" will light on the display.
Then the main unit will repeat all the total number of tracks.
3. Press the "REPEAT" button once more again. The main unit will return to play the
program in normally.
AUX IN PLAY
The AUX input is located at the rear of the unit (26). Use a 3.5 mm stereo jack cable
to connect audio equipment through the LINE IN jack.
1. To select the AUX input function, repeatedly press the FUNCTION button on the
unit (or remote control) until AUX is indicated on the display.
2. Press the VOLUME (UP or DOWN) button to adjust the sound output level.
Note: LINE in cable not included.
MUTE SETTING (ON THE REMOTE CONTROL)
1. When you press the MUTE button (2) once on the remote control, the volume level
will flash and the audio output will be temporarily terminated. (F22)
2. Press the MUTE button again, the volume level and the audio output will return to
normal.
HEADPHONES JACK
Headphones should have a 3.5 mm diameter stereo plug and an impedance of 8-32
ohms. When head phones are connected (18), the speakers are automatically
disconnected.