Operation Manual

UK-17
“TITLE NAME” “ARTIST NAME” and “ALBUM NAME” to show in the display.
3. Press the ID3 button on the remote again. Then resume to normally play.
USB/SD CARD OPERATION
During in the STANDBY mode
1. Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY/ON
button on the main unit (or remote control) to power “ON" the unit.
2. Press the FUNCTION button on the main unit (or remote control) to select the USB
or SD/MMC mode. The main unit will automatically read the total number of the
folders and tracks at the same time.(F9)
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER (UP or DOWN) button to select each folder.
b. Press the SKIP/TUNER SEARCH (UP or DOWN) button to select current track in
desired folder.
4. If the MP3 and WMA are written in "ID3".
a. During the unit in the MP3 or WMA playing, press the ID3/MONO/STEREO
button once. The display will shows a "ID3 ON", and then it will automatically search
more than 64 letters for "TITLE NAME", "ARTIST NAME" or "ALBUM NAME"
which move from the right corner to the left corner on the display continuously.
b. Press the ID3/MONO/STEREO button once again. The display will shows a "ID3
OFF", and then the main unit will play normally.
Note:
1. The main unit can play MP3 and WMA only in this mode.
2. This unit can support most of USB devices and SD/MMC/ SDHC cards. The
memory capacity up to 32GB. It can not access (or access a longer time) the memory
capacity over 32GB (We cannot guarantee the compatibility to any available USB- or
SD(/MMC) memory media).
3. It can support USB version 1.1 and 2.0.
4. The main unit does not support the WMA file which is protected "DRM FILE".