Specifications

GB-8
GB-7
Notice:
1.Car cigarette lighter adaptor can't be used to recharge the battery.
2.Car cigarette lighter adaptor is available to use only when the carpower
supply is 9-12V.
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the
right of the main unit, then plug the other end into the AC power receptacle.
Please refer to the following illustration
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on
the unit, plugthe other end into the car cigarette lighter socket. See
illustration below.
DC OUT
DC IN 9-12V
AV O UT
DC OUT
DC IN 9-12V
AV O UT
The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor
by a DC/AV cable. Also use this DC/AV cable to connect the AV OUT jack of
the unit to AV Injack of the Monitor.
Please refer to the illustration below.
Note: You're advised to supply both units the power by the cigarette lighter
adapteronly. The AC/DC adapter is used to supply power of one unit only
and as the charger to charge the main unit if it's with built-in battery.
ON/OFF
DC OUT
DC IN 9-12V
AV O UT
Connecting to the LCD monitor
Power supply and installation