Operating instructions

To set a different Satellite or LNB

Select Satellite mode, press MENU key, navigate down to

the Dish Setup option, press OK. You will see the Satellite

Dish Setup menu.

To set Multiple Satellites and LNBs (only possible

on multi-LNB dish, switch systems)

Use ST buttons to select the satellite to which your dish

is aligned. Press OK. An arrow will display against the

chosen satellite.

Press X button to navigate to LNB section of the menu.

Select the LNB type and settings for your LNB.

Press the Exit button and the W button to select the sec-

ond satellite.

Use ST buttons to select the second satellite. Use ST

keys to select the satellite to which your dish is aligned.

Press OK. An arrow will display against the chosen satel-

lite.

Press X button to navigate to LNB section of the menu.

Select the LNB type and settings for your second LNB

and switch settings.

Press the Exit button and the W button.

Press the blue Key twice to search the satellite channels.

A full description of the advanced Dish set up for

multiple satellites using DiSEqC switches and DiSEqC

positioner follows. This should only be attempted by

experience users.

The Dish set up main menu page displays the main inter-

face. The interface consists of Satellite List, Transponder

list and Dish/LNB parameter list

Satellite List

The Satellite list displays the satellite names.

Calgary 58 cm (23”) LED BLU-TV