Datasheet

SEFRAM 66
LCD voltage and continuity tester
Sefram
Sefram
FT SEFRAM66 A00 - Specifications can be updated without notice
For assistance and ordering
32, rue Edouard Martel - B.P. 55 - 42009 - St Etienne cedex 2
Tel.[phone]
Fax. [phone]
Website : www.sefram.fr - e-mail : [e-mail]
Specifications
SEFRAM 66
Voltage range 1V to 1000 VAC (16 à 800 Hz), 1 to 1500 VDC
Nominal voltage 6/12/24/50/120/230/400/690 V (represented shown as LCD segments)
L
ED Tolerances According to EN 61243-3
ELV-Indication LED for V>50 VAC or V>120 VDC
Response time <1s to 100 % of each nominal value
LCD Range 1 to 1000 VAC (16 to 800 Hz), 1 to 1500 VDC
LCD Resolution 0.1 V (1 to 29.9 V ), 1 V (30 to 1500 V)
L
CD voltage accuracy ±3 % ±5 dgt (1 to 29.9 V)
±
3 % ±3 dgt (30 to 1500 V)
Overrange indication ' 'OL' display
Safety current Is < 3.5 mA (at 1000 V)
Peak current <3.5 mA (at 1000 V)
M
easurement duty 30 s ON (operation time <690 V ),10 s ON (operation time >690 V),
2
40 s OFF (recovery time)
Internal battery consumption Approx. 120 mA
Single-pole phase test voltage range 100 to 1000 VAC (50/60 Hz)
Phase rotation test 170 to 1000 V phase-to-phase, AC (40-70 Hz)
Continuity test 0 to 500 kΩ + 50 %
R
esistance measurement
Range 0 to 1999 Ω
Précision 5 % ±10 dgt
at 25 °C
Resolution 1 Ω
F
requency measurement
Range 1 at 800 Hz
Precision ±5 % ±5 dgt;
resolution 1 Hz
RCD test 30 mA at 230 V
G
eneral specifications
Power supply 2x 1.5V IEC LR03 / AAA
O
perating temperature -15 to 55°C
Storage temperature -20 to 70°C without condensation
Humidity 85% relative humidity max.
Altitude Up to 2000 m
Safety / overvoltage CAT III 1000V / CAT IV 600V
Standard EN/IEC 61243-3:2014
Protection IP 64
Dimensions 239 x 68 x 29 mm
Weight 235 g with batteries
Warranty 2 years
Optional accessories:
SC518: Protective bag
SC523: Belt case
SC518: Protective bag SC523: Belt case