Datasheet

SEFRAM 66
Sefram
Sefram
The new SEFRAM 66 is an easy-to-use instrument :
Direct reading of voltage and polarity on LCD backlight screen.
Easy to use
Robust, The SEFRAM 66 is a field device resilient to shocks.
This tester is equiped with a torch light for measurements in
dark environments. The LCD display permit without ambigui-
ty an instaneous evaluation of the measured voltage. The
vibrator is activated and the backlight changes color when
voltage is detected.
Robustness and efficacy
The SEFRAM 66 has been designed, tested and approved
according to the EN61243-3 standard. Designed with IP2X
test probes, the user will be protected in any cases, Including
misuse of the instrument. The SEFRAM 66 is rated :
CAT III - 1000V and CAT IV - 600V. It's equiped with complete
autotest enable operating verification and with a double
safety information (in front and on a side).
Safety
• Start voltage : 6V
• Polarity indication
• Continuity test
• Single-pole phase test
• Phase rotation test
• Torch light
• Side detection for ELV and continuity
• Auto-power ON / OFF
• High resolution voltage of 0.1 V (<30 V )
• Voltage range : 1000V AC and 1500V DC
• Non-Contact Voltage detection
• RCD trip test (via 2-button activation)
• Diode test
• Voltage test with load
• Resistance measurement
• Frequency measurement
• Vibration motor for ELV
LCD voltage and continuity tester
Continuity
test
Voltage
detection
Autotest
Vibrator
RCD trip test
M
ake sure to visit
our Website
http://www.sefram.fr
Pointes de touche IP2X
Double diode de sécurité
et continuité
61243-3
Main features