Datasheet
SEFRAM 62
LED voltage and continuity tester
Sefram
Sefram
FT SEFRAM62 A00 - Specifications can be updated without notice
For assistance and ordering
32, rue Edouard Martel - B.P. 55 - 42009 - St Etienne cedex 2
Tel.+33 (0).4.77.59 36 81
Fax. +33 (0).4.77.57.23.23
Website : www.sefram.fr - e-mail : sales@sefram.fr
Specifications
SEFRAM 62
LED nominal voltage 6/12/24/50/120/230/400/690 V
LED Tolerance According to EN 61243-3
L
ED Security for V>50 VAC or V>120 VDC
Response time <1 s to 100 % for each nominal value
Safety current Is < 3.5 mA (à 690 V )
Peak current <3.5 mA (à 690 V )
Measurement duty 30 s during measurement (operating time), 240 s without measuring (recovery time)
B
attery consumption Approximatively 80 mA
v
oltage range for unipolar test 100 to 690 VAC (50/60 Hz )
Phase rotation test 170 to 690 V phase to phase, AC (40-70 Hz)
Continuity test 0 to 500 kΩ + 50 %
General specifications
Alimentation 2 piles 1.5V IEC LR03 / AAA
Température de fonctionnement -15 à 55°C
Température de stockage -20 à 70°C sans condensation
Humidité 85% d'humidité relative max.
A
ltitude jusqu’à 2000 m
S
écurité CAT IV/600 V / CAT III/690 V
Norme EN/IEC 61243-3:2014
Protection IP 64
Dimensions 239 x 68 x 29 mm
M
asse 235 g avec piles
G
arantie 2 ans
Optional accessories:
SC518: Protective bag
S
C523: Belt case
SC518: Protective bag SC523: Belt case