Datasheet

SEFRAM 62
Sefram
Sefram
The new SEFRAM 62 is an easy-to-use instrument :
Direct reading of voltage and polarity.
Easy to use
The new SEFRAM 62 has been designed, tested and approved
according to the EN61243-3 standard. Designed with IP2X
test probes, the user will be protected in any cases, Including
misuse of the instrument. The SEFRAM 62 is rated :
CAT III - 1000V and CAT IV - 600V. It's equiped with complete
autotest enable verification of all LED. And a double safety
LED (In front and on a side)
Safety
Robust, The SEFRAM 62 is a field device resilient to shocks.
This tester is equiped with a torch light for measurements in
dark environments. The LED display permit without ambiguity
an instaneous evaluation of the measured voltage.
Robustness and efficacy
• Start voltage : from 6V
• Polarity indication
• Continuity test
• Single-pole test
• Phase rotation test
• Torch light
•
Lateral display of dangerous voltage presence
and continuity
• Voltage test AC and DC to 690 V
• Auto-power ON /OFF
LED voltage and continuity tester
Continuity
test
LED
Autotest
M
ake sure to visit
our Website
http://www.sefram.fr
Pointes de touche IP2X
61243-3
Main features
Double diode de sécurité
et continuité