Specifications

Operating Manual SEFRAM 4451

M4451 A00

SETUPS Menu

F1: RECALL - Recalls a previously stored front-panel setup from the selected buffer. Change

the buffer number by using the rotary input knob. Valid storage buffer numbers

are from 1 to 99.

Buffer 0 is the factory default setup; buffer 99 is the last front panel setup before

power-off.

F2: STORE - Stores the current front-panel setup to the specified storage buffer. Change the

buffer number by using the data keys or the rotary input knob. Valid storage

buffer numbers range from I to 98.

F4: CLEAR ALL - Clears all data on all memory settings, after a YES or NO selection message.

3.6.6 UTIL Menu

Utility Menu

F1: GPIB -Selects the GPIB remote mode of operation. After selection the GPIB can be set to any

value from 1 to 31 using the rotary knob. The value is kept in a nonvolatile memory and

used at power-on. The factory default address is 10. Setting the address to 31 puts the

device in the off-bus state (it will not respond to messages on the GPIB bus).