Specifications

Operating Manual SEFRAM 4451

M4451 A00

than the combined rise times of the testing system, determine the actual rise time of the device under test by

using the following formula:

Rt equals the overall rise time or fall time of the entire measurement system and R1, R2, R3, etc. are the rise

times or fall times of the individual components in the system.

2.8 GPIB Connections

The rear panel GPIB connector is a AMPHENOL 57-10240 or equivalent, and connects to a standard IEEE-

488 bus cable connector. The GPIB line screens are not isolated from chassis and signal ground.

The instrument is shipped with the address set to decimal 10. The address can be changed from the front

panel by using the "SPCL" menu, refer to "SPECIAL FUNCTIONS".

GPIB connector

2.9 RS-232 Connection

The rear panel RS-232 connector is a standard DB-9 male connector configured as a

DCE:

Rt Rt Rt Rt=+++( ) ( ) ( ) ......1