User's Manual

3. Installation Process Of Product
Other
Functions
Low Power
Consumption
Static Mode
Illegal Dismantling
Alarm
Blind Area
Uploading Data
Epo Located For
Assistance
Inflexion Upload
Upgrade Remotely
The Power Down Alarm And
Light Sensor Alarm Triggered
Of The Device In 2 Minutes,
Then The Illegal Dismantling
Alarm Will Be Reported To The
Server
The Data Is Stored Up To
300pcs If The Terminal Is
Located And Not Online,
Upload When The Signal Is
Good
The Terminal Supports The Epo
Assisted Positioning Function
To Enhance The Positioning
Effect.
When The Angle That Vehicle
Turned Is More Than a Normal
Scale It Will Send a Location
Data Soon To Optimize The
Playback
The 3D Triaxial Accelerometer
Senses The Vibration State Of
The Vehicle In Real Time,
When The Car Is Moving, The
Device Is In Motion Mode; The
Device Will Change To Static
Mode After 5 Minutes Without
Vibration, Close The Gps
Module, When Vibration Is
Detected, The Device
Automatically Changes To
Motion Mode.
Need Assistance Of Factory
Device installation
1) Check Device
Check whether the appearance of the device is good
and whether the related accessories are complete