Use and Care Manual
1. “TEMP” temperature setting button;
2. Temperature UP Arrow Key & Down Arrow Key;
3. “TIME” time setting button
Operation (The temperature shows C degrees):
No.1: Turn power switch on, and press the power button, then the power indicator
is lightened.
No.2: Setting temperature, press “TEMP” key, then, press the UP arrow key or
down arrow key, set the right temperature. ( for T-shirt: 180 C degrees,)
When the temperature reaches the right range, the indicator on the top of
temperature-adjuster is switch off. Then the following operations can be
conducted.
No.3: Setting time, Press “TIME” key, then, press the UP arrow key or down arrow
key, set the right time.
No.4: Flatly place the cloth on the lower printing plate, then cover the printing
paper (please note the working surface of the paper), push the handle down
to specified point. Please note that the force should not more than 25 Kg at
this time, or otherwise, the handle will be transformed.