User's Manual
25
(4) App termination proceeds with the app termination process of each
OS.
8) Data upload
1) When the test is completed, open the battery cover, remove the
battery, and close the cover.
2) Run the Data upload program on the PC.
3) Connect PC and cradle with USB cable for data transmission.
4) After mounting the main body on the cradle, check if the main body is
connected to the data upload program.
(Please pay attention to the orientation when attaching the body to
the cradle. If the body is still operating without removing the battery,
it may take several seconds longer)
5) Click upload in Data upload program.
6) When data transmission is completed, remove the main unit from the
cradle and close the data upload program.
Run the program
Connect the Cradle and the PC
with the cable
Mount the main body on the
Cradle
Data download
Data upload
Data transmission completed and
close the program