User`s manual

SVR-500 Series
Network Video Recorder
User’s Manual
English
83
3.3.4 Event Triggers
Wehavenisheddeninghowaneventwillbetriggeredandwhich
serverswill be receivingnotications inthe previoustwo sections,
nowwecannishuptheeventcongurationbysetting:
• whichchannelswillhaveeventtriggerfunctionenabled
• Whatisconsideredtobeanevent
• Wherethewarningswillbesenttoandhowtheywillbesent
Select Channels to Enable Event Trigger and which type
of event should be triggered
• Use the checkbox to enable event trigger on the desired
channels
*Oncemotiondetectionisenabledinthispage,pleasecongurethemotionarea
andenablemotiondetectioninthecorrespondingchannels(cameras).TheNVR
onlydetectstherstmotionareasetinthecamera.TheNVRrecognizestherst
motionareabyitsIDnumbersetinthecamera.
*Enablingthe“customevent”optionallowstheNVRtoreceiveeventsfromthe
CMSsoftwareandstartrecording;eventssuchastheintelligentvideodetection
intheCMS.