User`s manual

SVR-500 Series
Network Video Recorder
User’s Manual
English
78
Trigger action
Nowthatyouhavetheeventtriggerdurationandintervaldened,
choose what action to be taken during an event trigger:
•Youcanchoosetohavetherecordersendouttherstfewframes
of the video recorder upon an event is triggered
•Youcanalsochoosetohavetherecordersendoutawarningmes-
sageine-mailorintxtleformatanduploadittoandestinedFTP
server
3.3.2 I/O Settings
This function allows users to manage camera’s digital input and out-
put ports right from the recorder. You can setup the recorder to re-
ceive triggers from a particular camera’s input port and trigger a de-
vice, such as an alarm that is connected to the recorder or camera’s
output port. Cameras that do not have built-in digital input/output
portcanalsobeconguredtopairwiththerecorder’sDI/DOports.
1. For cameras that come with physical digital input ports, their ports
will be listed in the far left drop-down menu.
2. Pick the desired channel for I/O mapping, and then select the
camera’s input port from the drop-down menu.
3. Select the trigger condition from the “Condition” drop-down
menu.
4. Select the recorder’s input port if you would also like to use the
recorder’s input port for event trigger. And then select the trigger
condition as well.
5. Next,selecttherecorder’soutputportanddeneitstriggerstate
6. Finally,denethetriggerduration.