User`s manual

SVR-500 Series

Network Video Recorder

User’s Manual

English

3.1.7 Disk Setup (SVR-516+ ONLY)

Once you install a hard disk to the recorder, you would need to ini-

tialize it so that it can be ready for recording. You can obtain basic

information about the disk you installed in this page

To initialize it, simply click the “Format” button

You can also connect external USB thumb drive to the recorder for

rmwareupgrade.

Forinstructionstoinstallaharddisktotherecorder,refertopage9

Toobtaindetailinformationaboutthedisk,goto“SystemOptions”>>“Disk

Status”

Tobringadiskonline,click“Format”

    If one or more disks you installed are not shown in the Disk Setup page, it

meansitcouldbeadiskthatisouroforderorcheckthecableandseeifit’swell

connected.