Installation guide

Quick Installation Guide
English
7
4 Channel (Basic)
Network Video Recorder
Restart Button
Press and release the button for hardware re-
start. The OS LED should should go off during the
restart to indicate the system is restarting. The
LED should indicate in solid green once the sys-
tem becomes ready.
Reset Button
Press this button will restore the system’s set-
tings to factory default values. To start, press and
hold the button for 5 seconds then release it once
the OS LED goes off. The OS LED should indicate
in solid green once the system becomes ready.
EthernetPortLED
The green LED on the left indicates the link connection and the LED on the
right indicates the speed