Installation guide
Quick Installation Guide
English
4 Channel (Basic)
Network Video Recorder
16
5. Click on “Detect” to establish connection between the recorder and
the camera. If connection establishes successfully, camera’s detailed
information should be polled and displayed as below
6. Adjust its video format, frame rate, resolution or bitrate…etc if you
wish and then click “Add” to nish adding the camera
Addacameramanually
Simply follow the instruction described above but instead of
using the “Search” function, enter the camera’s IP address and cre-
dential in the “Camera Information” manually, then follow step 5 ~6
described above.
Enter manually
1.
2.