User Instructions

3 / 17
Specification
Category Item Parameter
Wireless Support Wi-Fi Mode IEEE802.11b/g/n
RF system impedance 50Ω
Frequency Range 2.4~2.4835 GHz
Receiving sensitivity
20MHz MCS7@-71dBm;
40MHz MCS7@-68dBm;
54Mbps@-73dBm;
11Mbps@-86dBm;
1Mbps@-95dBm;
Physical layer data rate 802.11n MCS 0~7 150Mbps
Modulation DSSSOFDMDBPSKDQPSKCCKQAM16/64
Output Power
(Declaration for EU)
IEEE802.11b, POUT = +14.72dBm;
IEEE802.11g, POUT = +10.34dBm;
IEEE802.11n, POUT = +10dBm
Hardware Interface Type UART/SPI/GPIO
Interface rate
2Mbps@UART (Max)
50Mbps@SPI (Max)
Operating Voltage 3.3V(Module)/5V(Development Board)
Operating humidity 5%~90% (No condensation)
Operating temperature 0 ~ +50
Software Network Type STA/AP/AP+STA/Wi-Fi Direct
Verification WEP/WPA-PSK/WPA2-PSK
Encryption WEP64/WEP128/TKIP/CCMP(AES)
WPS Function WPS
Energy saving PS-POLL/Standby
Network protocol TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP
Interface Protocol AT+ instruction set
For more detail about specifications, please check the W600 Specification V1.0.0_EN.pdf and W600
HardwareDesignGuide_v1.0.1.pdf