User Instructions

10 / 17
AT+SSID=TEST_AP
3- KEY Set the wireless key of the AP you want to join. e.g. 12345678
AT+KEY=1,0,12345678
parameter 1：0 means HEX, 1 means ASCII
parameter 2：index: The key index number, 1 to 4 is used for the WEP encryption key. The other encryption
methods are fixed to 0.
parameter 3： Wireless key e.g.：12345678
4- NIP Enable DHCP
AT+NIP=0
5- PMTF Save the above parameters to spi flash, Just start from step 6 with the next boot
AT+PMTF
6- WJOIN Join the wireless network TEST_AP
AT+WJOIN