Data Sheet

1/18/2018 Serial CAN Bus - Longan Docs
http://docs.longan-labs.cc/can_bus/ 4/7
You can set the serial baud rate of the module with this command. There're 5 rates available, up to 115200 b/s.
value 0 1 2 3 4
baud rate(b/s) 9600 19200 38400 57600 115200
Eg: Set serial baud rate to 57600
Respose
OK or ERROR
Set CAN Bus Baudrate
You can use this command to set the rate of CAN Bus, there's 18 rates available. Normally, if you want to hack your
vehicle, 500k is the right one.
!!! tip Note Default is 500K
Eg: Set CAN BUS baud rate to 50K
Respose
OK or ERROR
Set Mask
value 01 02 03 04 05 06 07 08
rate(kb/s) 5 10 20 25 31.2 33 40 50
AT+S=[value]
Note
Default is 9600

AT+S=3
AT+C=[value]
AT+C=08



